Demobilization Equipment Reference Document

Modified on: Mon, Mar 14 2022 1:33 PM

Thanks for opening a demobilization ticket! Please return the following to BTECH using a sturdy box or the reusable box that was sent. If a shipping return label or return box is needed, reach out to JC Greco. (jgreco@swinerton.com)

Printer returns will be coordinated through the demobilization ticket by Peter Dederko. (Peter.Dederko@swinerton.com)

Please return all cables that came with the equipment

Contents:

1. Cisco Meraki Kit (MX68CW)

2. Server

4. Misc Items (1)

5. Misc Items (2)

6. Router (If site has a circuit in place)

7. Plan Table

8. Polycom

CISCO MERAKI KIT (MX68CW)

With No Enclosure

with Enclosure

*Please Include Power Adapter & cable if no enclosure

*No Power Adapter needed for the enclosure

SERVER (DELL, LENOVO)

Mini Lenovo / Dell Server	Desktop Server

MISC. ITEMS (1)

Return if you see any of these at the job site:

MR33

MR74

8 Port Switch

24 Port Switch

MISC. ITEMS (2)

CAMBIUM Point-To-Point Antenna

Teleworker Z3C

Please return bracket mount used to mount the antenna located on the back. Also please take care in packaging said equipment as the antenna is fragile.

ROUTER MODEM (Comcast, Spectrum, AT&T, etc.)

(If site is receiving internet from an ISP. [Comcast/Xfinity, AT&T, Spectrum] Owner provided internet excluded)

Design 1 Arris

Design 2

Design 3

Note: There are other designs not listed above. If the site is currently using an internet circuit, a modem will be at the site and may look like the above. The router device will also be connected to the port “Internet 1” on the Meraki Kit with no enclosure or the “Internet” dongle on a kit with an enclosure. If the site is not paying for the internet, for example if the building owner is supplying for the internet, then no router return is necessary.

Plan Table

M720 (Small Form)

M900 (Desktop)

Lenovo ThinkCentre M720